RLRoadLife Truckers

Construction area | Locations Wiki

The construction area contains the excavator and loading facility used to load soil into the dump trailer.

Construction area

The construction area contains the excavator and loading facility used to load soil into the dump trailer.

Evidence: 1 community-reported · Last verified: 2026-11-14 · Sources: 1

The Construction area is the loading point for the soil transport job in RoadLife Europe: Truckers. Your objective here is to maneuver the truck and dump trailer around the work site, position the trailer beside the excavator, and wait for the soil to be transferred before leaving with the loaded cargo.

The area includes an excavator and a loading facility. Correct positioning is essential because the excavator can load the trailer only after the truck and trailer are brought into the required position [src-707fc6e75d].

How to Complete

Approach the Construction area with the dump trailer attached. Drive carefully through the work site and line the trailer up near the excavator. When the trailer is correctly positioned, the excavator begins picking up soil and dropping it into the dump trailer. Remain in place until loading is complete, then leave the loading facility with the loaded trailer and continue toward the delivery route.

Step-by-Step Walkthrough

  1. Prepare the truck and trailer.
    Before reaching the Construction area, make sure the trailer is attached to the truck. The first job involves transporting soil from an excavation area, so the dump trailer is the cargo container used for this task [src-707fc6e75d].

  2. Drive to the work site.
    Follow the route to the job location and enter the Construction area. The site contains industrial structures, a loading facility, and the excavator used for the soil-loading process [src-707fc6e75d].

  3. Slow down inside the site.
    Work-site maneuvering is a central part of this location. Reduce your speed and make controlled steering adjustments while bringing both the truck and trailer around the facility. The trailer follows a wider path than the truck, so allow enough room when turning.

  4. Line up beside the excavator.
    Move the trailer into the correct loading position near the excavator. The placement of the trailer determines whether the excavator can drop soil into it, making alignment the key task at the Construction area [src-707fc6e75d].

  5. Hold the correct position.
    Once the trailer is positioned, keep the truck steady while the excavator works. The excavator collects soil and drops it directly into the dump trailer. The loading animation shows the soil gradually being transferred, and the truck may shake slightly when the load impacts the trailer [src-707fc6e75d].

  6. Wait for loading to finish.
    Do not leave the site while the excavator is still transferring soil. Confirm that the loading sequence has ended before pulling away. The trailer should remain attached and carry the loaded material out of the facility.

  7. Exit the Construction area carefully.
    Drive away from the loading facility at a controlled pace. The loaded dump trailer is covered with a tarpaulin, and the truck passes through the surrounding factory premises and industrial structures on the way out [src-707fc6e75d].

  8. Prepare for the road section.
    After leaving the site, continue along the delivery route. Some sections include narrower roads and several bends. A loaded trailer requires careful navigation through these turns so the truck and trailer stay on the road [src-707fc6e75d].

Tips

  • Use small steering inputs when approaching the excavator so the trailer does not swing past the loading position.
  • Watch the trailer’s position rather than relying only on the truck cab. The trailer must be aligned for the excavator to reach it.
  • Leave extra space around industrial buildings, facility edges, and other structures while turning.
  • Keep the truck stationary during the loading sequence. The visible shaking from falling soil is part of the loading process and does not indicate that you should move [src-707fc6e75d].
  • After loading, take turns slowly because the trailer is carrying soil and follows a different path from the truck.
  • Exterior camera views can help you judge the truck-and-trailer alignment while maneuvering around the loading area [src-707fc6e75d].

Loading and Departure

The Construction area is complete when the excavator has transferred the soil into the dump trailer and you have safely exited the loading facility. The job then continues as a transport run through factory premises and road sections toward the unloading location. The available material describes the loading process and departure, but it does not specify a separate reward, payment amount, score value, or unlock tied specifically to the Construction area.

Community-Reported Details

These facts come from community guides, videos or wikis. They are not official statements; verify in-game before relying on them.

loading_activity

The truck is positioned near an excavator so soil can be loaded into its dump trailer.

Sources

14 नवंबर 2026788 words4 min read